Matters Needing Attention for the Roller Conveyor Shot Blasting Machine

Matters Needing Attention for the Roller Conveyor Shot Blasting Machine


The shot blasting machine was firstly used for forging and removing the sand burning and the oxide skin of the forging parts. The shot blasting machine mainly uses the abrasive pill which is thrown by the high-speed rotating impeller to hit the surface of parts at high speed so as to meet the requirement of the surface treatment.

Matters Needing Attention
The operator who operates the shot blasting machine must be trained strictly and know about the features and functions of the roller conveyor shot blasting machine before operating the machine.

The operator must know about every operating procedure, application, repair and maintenance of the shot blasting machine's instruction book.

The operator needs to check whether all switches of the control cabinet are in the required positions or not before turning them on so as to prevent incorrect operation, the damage to electrical and mechanical equipment and the accident.

The non-operating personnel should not arbitrarily operate or touch the electrical switch control area or get close to the working area of the roller conveyor shot blasting machine to prevent accidents.

The operator needs to wear the protective clothing and glasses.

The operator must specially pay attention to the indication panel while turning on the roller conveyor shot blasting machine. Operate the roller conveyor when all the indicators reach the normal values. If any index is abnormal, power off the roller conveyor shot blasting machine immediately. Deal with the defect before turning on the roller conveyor shot blasting machine.

When the roller conveyor shot blasting machine is in operation, it is necessary for the operator to check whether there is an abnormal sound for the roller conveyor shot blasting machine and overheating for all its parts. When there are serious defects during the operation, the operator should immediately press the "emergency stop" button to shut down the roller conveyor shot blasting machine and help the professionals check the machine.

It is necessary to clean up the dust and debris inside the dust collector weekly in order to prevent the effect of the roller conveyor shot blasting machine on the dust removal, and to ensure the intact rate of the shot blasting machine.

The operator must safely operate the roller conveyor shot blasting machine and strictly obey the shift change principle.

Immediately turn off the roller conveyor shot blasting machine when it finishes working so as to prevent keeping it in operating conditions, and clean the work site.